Slurry ice Machine Slurry ice complete wrap fish Fast cooling
Slurry-ice is a unique chilling medium and is formed out of seawater of a mixture of fresh water and salt. The microscopic crystals form a suspension in seawater in any required concentration.
♦ Slurry-ice completely covers the fish, chilling the fish instantly and the greater chilling characteristics of up to 15 to 20 times better than that of conventional block ice.
♦ Chilling the catch as rapid as possible and keeping the fish at -1ºC to -2ºC as long as possible.
♦ As the ice crystal leave the fish in a soft bed, this kind of slurry-ice does not damage the fish.
♦ Can be pumped at a concentration from 20% to 50% and easy to distribute and handle which increases productivity and flexibility.
♦ This kind of machine can also be used as high efficient sea water cooler.
The type of Liquid ice machine,
Freshwater liquid ice machine,
seawater liquid ice machine (on board)
|Cooling Capacity (kw)||28.5||51.3|
|Running Power (kwh)||14||25.2|
|Install Power (kwh)||20||36|
|PQuick Freezen Sea Water Slurry Ice Making Machines 10ton Ice Blusting Machineower supply|
Competitive Advantage: Ice Systems Precooling Slurry ice Cooling for vegetables
1. High latent energery: The slurry ice is binary mixture of water and ice crystals with a high heat interchanging capacity amounting to 80kcal/kg.
2. Low energy cost: The producing of slurry ice is 2 times engery saving than tranditioinal ice making. In adddition, the slurry ice can be stored in thermal storing reservoirs and approved by the heat department for being resued later on. It allows you to produce the slurry ice in the electricity off-peak when the electricity charge is cheaper and use them in the peak time, which can save you the electricity cost.
3. Human energy saving. Slurry ice machine does not need people to shovel and transport the ice the end-use destination. It is pump-able, and a hose can get the job done, which make it a very labor-efficient ice solution.
4. The largest contact surface with the products to be chilled. The heat transfer surface contact between the ice and the product is the largest, and the slurry ice is at sub-zero temperature, which makes the slurry ice fast chill the product to be temperature around 0°C. Once the liquid surplus is drained, the pruduct is left totally surrounded by smooth, round ice and consequently protected from the versatile enviroment.
5. The chilling time drops: It increase the chilling speed up to 200% compared with traditional ice.
6. Extend the fresh time of food. Extend the fresh time of fish, or meat to get enhanced quality and better price. Due to the round shape of the crystals and the absence of sharp edges and the fast cooling of the products, the slurry ice becomes ideal for application directly on the pruduct to be chilled so avoiding any damage to the product, which can improve the qulity and appearance of fish or meat.
7. More hygienic ice quality: The ice is always stored into thermal storage reservoirs and pumped through the pipes so there is no posibility to polluted by air-borne dust or other contaminant deposited on the exposed parts of the tanks and vats.
8. Pump-able: One of the main advantages of this system is its easy distribution. Due to its tiny crystals and pump-ablility, the slurry ice has the property to flow through small tubes and holes, so it can be pumped through rigid and flexible pipes from its generation point up or down to its application point, basically not limited by the destination of the end-user.
9. Lower infrastructure cost: The necessary ancillary equipments for the slurry ice machine is less as it does not need facilities below:
a. Load-bearing facilities of great ice silos.
b. Mechanical system to remove the ice from the silos.
c. Light tanks to transport the ice to final destination.
d. Electic or gasoline trucks.
e. Maintenence of the facilities, especially the moving parts.
f. Conveyor belt for the ice
Top Manufacturer Liquid Ice System 1t to 30tons, Freshwater liquid ice Machine system Sistema de maquina de hielo
A. Installation for ice machine:
1). Installing by the user: we will test and install the machine before shipment, all necessary spare parts, operation manual and CD are provided to guide the installation.
2).Installing by LR engineers:
(1) We can send our engineer to assist the installation and provide technical support and train your workers.
(2) the installation place, electricity, water and installation tools should be prepared before our engineers' arrival. Meanwhile, we will provide you a Tool List and relative material for installation should be prepared in advance.
(3) During installation period, 2~ 3 workers are required to assist the installation project.
1) 12 months warranty after delivery.
2)Professional after-sales department to provide 24/7 technical support, all complaints should be replied within 24 hours.
3)Over 10 engineers available to service machinery overseas.
4)Free spare parts replacement within warranty period if any damage due to quality problem.
5)Beyond guarantee period, we will charge market price for spare parts.
C. Why choose us ?
1) We have exported our ice machines to more than 7 years , and 120 countries ;
2)Excellent Brand of China Ice Machine Industry;
3) Produce & Academic Research Strategy Cooperating Partner with University.